General Information
Imatra C 100 is high carbon grade alloyed with Cr and mainly used for grinding rods in ore processing
Similar designations
E51100
Variants
Imatra C 100 is high carbon grade alloyed with Cr and mainly used for grinding rods in ore processing
E51100
| Youngs module (GPa) | Poisson´s ratio (-) | Shear module (GPa) | Density (kg/m3) |
|---|---|---|---|
| 210 | 0.3 | 80 | 7800 |
| Average CTE 20-300°C (µm/m°K) | Specific heat capacity 50/100°C (J/kg°K) | Thermal conductivity Ambient temperature (W/m°K) | Electrical resistivityAmbient temperature (µΩm) |
| 12 | 460 - 480 | 40 - 45 | 0.20 - 0.25 |
Would you like to know more about our offers? Don´t hesitate to contact us:
Via e-mail: info@ovako.com
Via telephone: +46 8 622 1300
For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/
Disclaimer
The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in this document.