Variants
Variant | Cast | C % | Si % | Mn % | P % | S % | Cr % | Ni % | Mo % | Cu % | N % | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4756 | CC | Min | 0.13 | 0.01 | 0.70 | - | 0.035 | 0.60 | 0.80 | 0.00 | 0.00 | 0.0100 |
Max | 0.25 | 0.15 | 1.10 | 0.020 | 0.050 | 1.20 | 1.40 | 0.20 | 0.35 | 0.0150 |
Variant |
+A: Soft annealed
+AR: As rolled |
Format | Dimension [mm] | Hardness |
---|---|---|---|---|
Rp0.2 * Reh, ** Rel | ||||
4756 | +AR | Round bar | 25 < 160 | < 300 HB |
+A | Round bar | 25 < 160 | < 250 HB |
Temperature °C | |
---|---|
MS | 368 |
AC1 | 723 |
AC3 | 812 |
The following graphs are generated from a theoretical model. For further info see the Heat treatment guide module. Select a specific grade version for individual display.
At Ovako sustainability and reduction of our environmental impact is a major focus in everything we do.
Further information is found here.
Steel works | Hofors | Smedjebacken | Imatra |
---|---|---|---|
CO2e/kg | 120 | 62 | 76 |
To get the full picture of our products environmental impact we have to look at all of our CO2 emission sources.
Not only the steel work Scope 1-2 itself, but all operations downstream in our production, heating and heat treatment furnaces etc (full scope 1-2) as well as all the emission from input material, eg. alloys, scope 3.
Steel Grade | Format |
+AR: As rolled
|
Scope 1-3 (CO2e kg /1000 kg steel) | Climate compensated Net emission = Scope 3 (CO2e kg /1000 kg steel) Scope 1 - 2 = 0 (compensated) |
---|---|---|---|---|
4756 | Round bar | +AR | 664 | 361 |
All above data are to be seen as typical values for the specified format and condition. Detailed information about your specific product please contact your sales contact.
Youngs module (GPa) | Poisson´s ratio (-) | Shear module (GPa) | Density (kg/m3) |
---|---|---|---|
210 | 0.3 | 80 | 7800 |
Average CTE 20-300°C (µm/m°K) | Specific heat capacity 50/100°C (J/kg°K) | Thermal conductivity Ambient temperature (W/m°K) | Electrical resistivityAmbient temperature (µΩm) |
12 | 460 - 480 | 40 - 45 | 0.20 - 0.25 |
Would you like to know more about our offers? Don´t hesitate to contact us:
Via e-mail: info@ovako.com
Via telephone: +46 8 622 1300
For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/
Disclaimer
The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in this document.
You have no steel grades in your list.