Filter datasheet

    Material data sheet

    Steel grade

    • Ovako234K
    Last revised: Mon, 17 Dec 2018 09:42:03 GMT

    General Information

    16MnCr5 is an alloyed case hardening steel used for e.g. mechanical engineering components.The steel can be M-treated in order to optimize the machinability.

     

    For additional Heat Treatment Data, please visit the Heat Treatment Guide.

    Similar designations

    16MnCrS5

    Other properties (typical values)

    Youngs module (GPa)Poisson´s ratio (-)Shear module (GPa)Density (kg/m3)
    210 0.3 80 7800
     Average CTE 20-300°C (µm/m°K) Specific heat capacity 50/100°C (J/kg°K) Thermal conductivity Ambient temperature (W/m°K) Electrical resistivityAmbient temperature (µΩm)
     12  460 - 480  40 - 45  0.20 - 0.25

    Contact us

    Would you like to know more about our offers? Don´t hesitate to contact us:

    Via e-mail: info@ovako.com 

    Via telephone: +46 8 622 1300

    For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

      

     

    Disclaimer

    The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in this document.