STEEL NAVIGATOR Find the right steel for your needs

Filter datasheet

Variants

Last revised: Fri, 25 Nov 2022 10:45:12 GMT

14NiCrMo13-4*

All

General Information

14NiCrMo13-4 or AISI 9315 as also named in US standards is a case hardening steel used in forgings to eg rock drilling tools.

Similar designations

1.6657, AMS 6263, SAE 9315, En36c

Chemical composition

Variant	Cast	Weldability		C %	Si %	Mn %	P %	S %	Cr %	Ni %	Mo %	Cu %	DI %
253C	IC	CEV _max	Min	0.14	-	0.50	0.000	0.025	0.95	3.20	0.25	-	-
253C	IC	Pcm _max	Max	0.17	0.10	0.70	0.015	0.045	1.05	3.35	0.35	-	-
253D	IC	CEV 0.87_max	Min	0.12	0.15	0.40	-	-	1.00	2.95	0.08	-	2.40
253D	IC	Pcm 0.38_max	Max	0.17	0.35	0.70	0.035	0.040	1.45	3.35	0.15	-	7.20
254S	IC	CEV _max	Min	0.14	0.20	0.55	0.000	0.010	1.20	2.75	0.22	0.00	-
254S	IC	Pcm _max	Max	0.17	0.35	0.75	0.020	0.025	1.40	3.15	0.27	0.20	-

Transformation temperatures

	Temperature °C
AC1	692
AC3	805

Heat Treatment Guide generated Graphs

The following graphs are generated from a theoretical model. For further info see the Heat treatment guide module. Select a specific grade version for individual display.

Hardenability

Jominy hardenability of Ovako 254S. Average value with +/-standard deviation.

SUSTAINABILITY-ENVIRONMENTAL IMPACT DATA

At Ovako sustainability and reduction of our environmental impact is a major focus in everything we do.
Further information is found here.

In many international comparisons the crude steel Scope 1-2 emission is a key parameter, ie. the CO₂ emission from the steel works itself.
As of 1 January 2022 we carbon offset all our scope 1 and 2 volume shown below.

Steel works	Hofors	Smedjebacken	Imatra
CO2e/kg	120	62	76

To get the full picture of our products environmental impact we have to look at all of our CO₂ emission sources.
Not only the steel work Scope 1-2 itself, but all operations downstream in our production, heating and heat treatment furnaces etc (full scope 1-2) as well as all the emission from input material, eg. alloys, scope 3.

Steel Grade	Format	Condition	Scope 1-3 (CO2e kg /1000 kg steel)	Climate compensated Net emission = Scope 3 (CO2e kg /1000 kg steel) Scope 1 - 2 = 0 (compensated)
253D	Round bar	+AR	1175	779
253D	Round bar	+A	1188	783
253D	Tube,wall	+AR	1231	829
253D	Tube,wall	+A	1234	829

As of 1 January 2022 we use carbon offset for all our scope 1- 2 emissions, so in practice the climate compensated data is the same as the full Scope 3 level.
All above data are to be seen as typical values for the specified format and condition. Detailed information about your specific product please contact your sales contact.

Other properties (typical values)

Youngs module (GPa)	Poisson´s ratio (-)	Shear module (GPa)	Density (kg/m3)
210	0.3	80	7800
Average CTE 20-300°C (µm/m°K)	Specific heat capacity 50/100°C (J/kg°K)	Thermal conductivity Ambient temperature (W/m°K)	Electrical resistivityAmbient temperature (µΩm)
12	460 - 480	40 - 45	0.20 - 0.25

Contact us

Would you like to know more about our offers? Don´t hesitate to contact us:

Via e-mail: info@ovako.com

Via telephone: +46 8 622 1300

For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

Disclaimer

The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in this document.

General information
Chemical composition
Transformation temp.
HTG Graphs
Hardenability
Sustainability